BAYSEAL 500®

Bayseal 500® is a Solvent based Silane Siloxane that provides a protective impregnating treatment Based on Nano-technology for Penetrative capability.

Category:
  • Uses:
    Bayseal 500® is suitable for fixing vertically over:
    – Natural sand stones
    – Natural rocks
    – Concrete & Plaster
    – Acrylic & Solvent base coatings
  • Advantages
    – Prevent the penetration of rain and potable water
    – Resist chlorides and sulphates
    – Helps to prevent efflorescence.
    – Chemically resistant to fuels, atmospheric contaminants and oils.
    – Fast reactive action
    – Discoloring protection
    – Excellent water repellant
    – Single component, no mixing
    – Colorless
    – Transparent finish
    – Tolerant for hot and cold climate
  • Compliance : ASTM C309 Type 1 Class B
  • Material Data:
    – Type: Silane Siloxane
    – Form: Colorless, clear liquid
    – Parking: 1USG, 5USG & 160Kg packs
    – Storage Condition : 12 month in unopened packaging, between 5°C and 35°C
  •  TECHNICAL DATA
    Specific Gravity0.78+ 0.05 @ 25°C
    Volume Solid 5-7%
    Mixing Ratio No Mixing is required. Ready to Use
    Setting time >25 minutes
    Coverage3-6 m²/ltr/coat, minimum 2 coats required depending on the type of surface
    Temperature 5°C lowest
    Surface SituationCement / concrete-based substrate age must be at least 28 days.
    ResistantOil Fuel Acid 10%
  • APPLICATION DETAILS
    – Surface Preparation: Substrate should be sound, clean and free from dirt, dust, laitance and all loosely adhering particles. Absorbent cement-based surfaces should be thoroughly saturated with water to achieve surface saturated dry condition.
    Application: Apply Bayseal 500®at 3-6m²/ltr directly to the prepared substrate, using a brush or spray
    machine and spread the liquid evenly over the area.
    1- Apply the first coat upwards until you visually see the surface has been completely
    filled.
    2- The second coat should be applied from side to side allowing for hidden areas to be
    covered.
    Note: You might require to over coat the area repeatedly if the absorption of the surface is high, this absorption depends
    on the type of surface and condition
    Curing: Curing 2 hours after the final coat is appliedSAFETY:
    Protection Measures Bayseal 500® is solvent base product and there is risk of cauterization in the event of contact
    with the eyes; will lead to dehydration and thereof irritation in case of contact with skin. So
    while mixing and applying the product, protect with safety goggles and protective gloves
    – Splashes to skin must be washed off with water and Soap
    – Splashes to the eyes must be rinsed with clean warm water. Seeking medical attention
    is highly recommended and mandatory
  • SAFETY
    Protection Measures : Bayseal 500® is solvent base product and there is risk of cauterization in the event of contact
    with the eyes; will lead to dehydration and thereof irritation in case of contact with skin. So
    while mixing and applying the product, protect with safety goggles and protective gloves
    1- Splashes to skin must be washed off with water and Soap
    2- Splashes to the eyes must be rinsed with clean warm water. Seeking medical attention
    is highly recommended and mandatory
    Toxicity: Toxic Material
    – Environmentally : Do not dispose into water or soil, kindly refer to Local Regulations and procedures
    – Remarks : Bayseal 500® empty cans should not be used for FOOD STORING at any condition what so
    ever